One 16:9 master for Samsung Ads CTV and Quora video ads, under 50 MB

Both take 16:9 MP4 with H.264 and AAC. The shared envelope: 5 to 60 seconds, 1920x1080, 30 fps, under 50 MB. Build it as a Sume timeline and check the size.

5 min readSume
All posts

Make one MP4 at 1920x1080, 30 fps, H.264 video and AAC audio, between 5 and 60 seconds long and under 50 MB, and it satisfies both Samsung Ads' CTV video spec and Quora's video ad spec. Render it as a Sume timeline with output width 1920, height 1080 and fps 30, then check the file size before you upload.

The numbers come from Samsung's DSP help page and Quora's ad specs, both read 2026-10-04. The existing posts on Samsung TV specs and Quora specs cover each alone; this one finds the overlap.

Where do the two specs overlap?

Samsung's CTV row is shown. Quora's limits are the stricter ones on frame rate and length, and Samsung's are stricter on file size and minimum length.

Samsung CTV and Quora video specs with the shared range, read 2026-10-04
PropertySamsung CTVQuoraSafe for both
FormatMP4MP4 or MOVMP4
Aspect ratio16:916:916:9
ResolutionMin 1280x720, recommended 1920x1080640x360 to 1920x1080, recommended 1280x7201920x1080 or 1280x720
Length5 to 90 s3 to 60 s5 to 60 s
Frame rate30 fps recommended30 fps or less30 fps
File size50 MB max, 30 MB recommended70 MB or lessUnder 50 MB
CodecsH.264, AAC or MP3H.264, AACH.264 and AAC

Why does bitrate decide whether 60 seconds fits?

Samsung asks for a bitrate between 5 Mbps and 10 Mbps for CTV. Size is bitrate times length: at 10 Mbps, one second is 1.25 MB, so 60 seconds is about 75 MB, which breaks Samsung's 50 MB cap. At 5 Mbps, 60 seconds is about 37.5 MB and passes. A 30-second spot passes at either end of the range, near 37.5 MB at 10 Mbps.

The rule of thumb: for a 60-second ad, aim for the low end of the bitrate range, and prefer 15 to 30 seconds, which is also what both vendors recommend.

How do I build it in Sume?

Timeline accepts output width and height as even integers from 256 to 2160, fps of 24, 25, 30 or 60, and up to 200 video slots over an audio spine of 1 to 1800 seconds. Set 1920, 1080 and 30. It costs $0.10 per output minute, rounded up, and you send an Idempotency-Key header. Source URLs must be on media.sume.com.

Timeline takes no ffmpeg arguments, so you cannot set the bitrate directly. That is why the size check matters: download the result, read its byte count, and compare it with 50 MB. If it is over, shorten the cut or simplify the footage, since busy motion costs more bits.

How do I check the file before uploading?

Import the finished MP4 and run video-inspect, which returns a probe of the file along with stills and, when requested, a transcript. It needs an Idempotency-Key and a source of at most 1800 seconds. Use the probe to confirm resolution, frame rate and duration against the table, and note that STT billing only applies if you ask for a transcript ($0.01 per audio minute).

Last, remember Quora's note that captions and sound are recommended, not required. Burn captions into the master with video-captions if the ad will often play muted.

Sources

Related posts

More in Use cases

All Use cases posts

Written by Sume