H3 Max Recast: a 30-second, 4-person swap costs $11.25 at 768p

Sume bills a 30-second H3 Max Recast at 768p for $11.25 and 1080p for $16.88. Reference photos add nothing; fal's page says the same. Arithmetic inside.

3 min readSume
All posts

A 30-second H3 Max Recast job on Sume costs $11.25 at 768p and $16.88 at 1080p, the same whether you send one reference photo or four. The rate is $0.375 per output second at 768p and $0.5625 at 1080p, which is the fal list price times Sume's 1.25 margin. Add the 5.5% platform fee from Sume's pricing policy and the all-in figures are about $11.87 and $17.80.

H3 Max Recast is the person-swap row in the video catalog: you send a source clip with video_url and one reference photo per new person (1 to 4), and the output keeps the source motion, camera, cuts and sound. The source must be 5 to 30 seconds and no single shot can run longer than 15 seconds.

Sume's constants for this row are dated 2026-10-01 in the repo (fal_h3_max_recast_2026-10-01), the same day fal's list took effect for it, so the table below matches today's page.

The numbers, read 2026-10-08

The table is produced by a script that imports the repo's estimateH3MaxRecastProviderCost and multiplies the fal list by the house margin. Seconds are rounded up before pricing.

Recast price for a 30-second source (read 2026-10-08)
Resolutionfal list per secondSume per second (x 1.25)30 seconds on SumeWith 5.5% fee
768p (default)$0.30$0.375$11.25$11.87
1080p$0.45$0.5625$16.88$17.80

The arithmetic

At 768p: $0.30 x 1.25 = $0.375 per second, and $0.375 x 30 = $11.25. At 1080p: $0.45 x 1.25 = $0.5625 per second, and $0.5625 x 30 = $16.88. A 22.3-second source rounds up to 23 seconds first, so it bills 23 x $0.375 = $8.63 at 768p.

fal's model page, read today, lists $0.30 per second at 768p and $0.45 at 1080p and says reference images are included at no additional charge. Sume's estimator has no per-reference line either, so four swapped faces cost the same as one. That differs from MiniMax H3 text-to-video, where reference-to-video adds $0.08 per image after the fifth.

Steps to get a firm number

  • Measure the source length in seconds and round up. Anything under 5 seconds is rejected and anything over 30 seconds needs splitting at a cut.
  • Check that no shot runs past 15 seconds; if one does, trim the source first.
  • Pick 768p for review cuts and 1080p only for the winner. The price gap is 1.5x per second.
  • Submit on POST /v1/video-router/generate with model: "h3-max-recast", video_url and one reference_image_urls entry per person.

If you move up a resolution

At 1080p the Recast rate is $0.5625 per second, so the same 30-second swap is 30 x $0.5625 = $16.88, which is $5.63 (50%) more than the 768p price of $11.25. Add the 5.5% platform fee and the two totals become $11.87 and $17.80. Use 768p while you check the identity and motion, and spend the extra $5.63 only when the swap is approved.

What Sume does not do

Sume does not offer text-only generation on this row, does not take an aspect ratio, and does not auto-route to it: sume/auto never picks Recast, so you must request it by id. Prices are read from the catalog on 2026-10-08 and can move when fal changes its list.

Sources

Related posts

More in Pricing

All Pricing posts

Written by Sume