100 Veo 3.1 Fast clips of 8 s: $80 at Google, $100 on Sume Omni
A batch of 100 eight-second Veo 3.1 Fast clips is $80 at 720p on Google's list. The same batch on Sume's Omni row is $100, and on Wan 3.0 it is $100 at 720p.
One hundred 8-second Veo 3.1 Fast clips cost $80.00 at 720p on Google's list price ($0.10 x 800 seconds). Moving the same batch to Sume costs $100.00 on gemini-omni-flash-1.1 at 720p ($0.125 x 800) and $100.00 on wan-3.0 at 720p. The Veo Fast preview id is also on Google's shutdown list for October 22, 2026, so the $80 line has an end date that the Sume lines do not.
The arithmetic
Eight seconds is a common batch unit and fits both models' ranges. 100 clips of 8 seconds is 800 seconds. Multiply that by each per-second rate. Google's Veo 3.1 Fast list is $0.10 at 720p, $0.12 at 1080p and $0.30 at 4K, with audio included. Sume's Omni rates are the provider list times 1.25: $0.125, $0.1875 and $0.375. Sume's Wan 3.0 rates are $0.0625, $0.125 and $0.25 at 480p, 720p and 1080p.
| Resolution | Veo 3.1 Fast at Google | Omni Flash 1.1 on Sume | Wan 3.0 on Sume |
|---|---|---|---|
| 720p | $80.00 | $100.00 | $100.00 |
| 1080p | $96.00 | $150.00 | $200.00 |
| 4K | $240.00 | $300.00 | Not offered |
What the numbers say
At 720p Sume costs 25 percent more than Google's Veo Fast list for the same seconds. At 1080p the gap widens: Omni on Sume is $150.00 against $96.00, which is 56 percent more. At 4K Omni on Sume is $300.00 against $240.00, which is 25 percent more again. Wan 3.0 at 1080p doubles to $200.00 because its 1080p rate is twice its 720p rate.
The price difference buys access: after October 22 the Veo Fast preview id stops working at Google, and Sume lists no Veo model. The question is not Sume versus Veo Fast for the long run; it is which listed model you move to.
Where the 25 percent goes
Sume's rule, from its Video Router and Video generation docs, is that it bills the provider list times 1.25 for each output second. On this batch the move from $80.00 to $100.00 is $20.00, which is exactly 25 percent of the $80.00 Veo Fast figure, because the Omni list price in Sume's table is also $0.10 a second at 720p. The Wan 3.0 and Omni rows share the same multiplier, which is why they tie at $100.00 at 720p.
If the 720p quality of either Sume row is enough, the cheaper path is a 360p or 480p pass first. Omni at 360p for the same 800 seconds is $30.00, and Wan 3.0 at 480p is $50.00.
Fit checks before you move the batch
Check that the clip fits the row. Omni accepts 3 to 10 seconds, so 8 seconds is valid, with 16:9 or 9:16 only. Wan 3.0 accepts 2 to 30 seconds. Audio is always on for Omni, while Veo's price already includes audio by default. Finally, price a single job with usage.cost from the poll response before submitting 100, because the reserve at submit is the list price times 1.25 and a batch multiplies any surprise.
- Veo Fast preview shutdown: October 22, 2026 (Google deprecations page, read 2026-10-08).
- Omni on Sume: 3 to 10 seconds, 360p to 4K, 16:9 or 9:16.
- Wan 3.0 on Sume: 2 to 30 seconds, 480p to 1080p.
Sources
Related posts
More in Pricing
- A $1,000 balance buys how many replacement clips: 8s 720p vs 12s 1080p
With $1,000 on Sume you get 100,000 cents of clips: from 413 to 1,666 clips at 8s 720p 9:16, and from 122 to 595 at 12s 1080p, depending on the model.
- 1000 Sora prompts at 8s 720p 9:16: the bill and the reserve per wave
A 1,000-clip library of 8-second vertical 720p clips costs $600.00 to $2,420.00 on Sume. Sume reserves the cost at submit, so size your waves.
- 1,000 seconds of Omni Flash: Google about $101, Sume $37.50 to $375
1,000 seconds of Gemini Omni Flash is about $101.36 at Google's 720p token rate and $37.50 to $375 on Sume by resolution. The arithmetic is shown.
- 1,000 drafts: GPT Image 2.5 low at $10 vs Seedream 5.0 Lite at $50
A thousand draft images cost $10 on GPT Image 2.5 at quality low and $50 on Seedream 5.0 Lite on Sume. The cents arithmetic and when the dearer row still wins.
Written by Sume