Vizard Free exports 720p up to 10 minutes: Sume trim limits compared
Vizard Free caps exports at 720p and 10 minutes. Sume's video trim takes a source up to 1,800 seconds and outputs up to 900 seconds, for $0.02 per job.
Vizard's pricing page says Free exports are 720p and capped at 10 minutes. Sume's POST /v1/video-trim accepts a source up to 1,800 seconds, returns at most 900 seconds, and costs $0.02 per job, so a 10-minute cap is not a Sume constraint.
The two limits side by side
Vizard's cap applies to what you can export on the Free plan. Sume's limits apply to one trim request, whatever the plan, and the price is per job rather than per minute.
| Item | Vizard Free | Sume video trim |
|---|---|---|
| Output length | 10 minutes maximum | 900 seconds (15 minutes) maximum |
| Source length | Not stated here | 1,800 seconds maximum |
| Resolution | 720p on Free | Follows the source |
| Price | Plan credits | $0.02 per job |
Trimming a long recording on Sume
The source URL has to be on media.sume.com. precision is exact or keyframe: exact re-encodes to cut on the frame you asked for, keyframe is faster and snaps to a nearby keyframe.
A recording longer than 1,800 seconds needs splitting upstream before you trim. For an hour-long podcast, cut it into segments first, then trim each segment to its highlight.
Which to pick
If you need automatic highlight selection and a hosted editor, Vizard's plans are built for that. If you already know the in and out points, or your own code chooses them from a transcript, a $0.02 trim per clip is a cheap deterministic step you can run inside a script.
Sources
Related posts
More in Comparisons
- Wan 3.0 or MiniMax H3 Max: which to pin for reference-to-video
Both take image, video and audio references on Sume. Wan runs 2 to 30 seconds with 5 reference videos; H3 Max runs 5 to 15 seconds with always-on stereo audio.
- Wan 3.0 or Seedance 2.5: which is cheaper for a 10-second 720p clip?
Wan 3.0 is cheaper: a 10-second 720p clip is $1.00 at fal list ($1.25 on Sume) against about $4.62 ($5.78 on Sume) for Seedance 2.5, roughly 4.6x.
- Which image and video models on Sume have open weights?
Sume's catalog is hosted. Where vendors publish weights for families Sume lists (Qwen-Image, MiniMax H3, FLUX.2) and why a null hugging_face_id proves nothing.
- Which image model follows a rough sketch best? A test plan on Sume
No honest ranking exists without your sketches. Run one sketch and one prompt through four Sume image models, score six traits, and read the cost per try.
Written by Sume