Fabric talking clip cost by audio length: 480p vs 720p table
VEED Fabric 1.0 on Sume bills per audio second: $0.10 at 480p, $0.1875 at 720p, up to 300 seconds. Cost of 15, 30, 60, 120 and 300 second clips.

A Fabric talking clip costs $0.10 per audio second at 480p and $0.1875 per audio second at 720p on Sume, so a 60-second clip is $6.00 or $11.25. The pricing page, read 2026-10-03, prices VEED Fabric 1.0 per ceil(audio second) after Sume's margin, allows at most 300 seconds, and requires the audio to be Sume-hosted and under 10 MB.
What does each length cost?
The charge follows the audio you send, not the picture, so a shorter voiceover is the main lever. Seconds are rounded up before pricing.
| Audio seconds | 480p | 720p |
|---|---|---|
| 15 | $1.50 | $2.812 |
| 30 | $3.00 | $5.625 |
| 60 | $6.00 | $11.25 |
| 120 | $12.00 | $22.50 |
| 300 | $30.00 | $56.25 |
How do I keep the bill down?
- Draft at 480p, then render the keeper at 720p. A 30-second draft is $3.00 against $5.63 at 720p, and the 480p draft shows you the lip-sync and framing before the dearer run.
- Trim the audio before you submit. Dead air at the start and end is billed as audio seconds.
- Remember the voiceover has its own price. A script's text-to-speech is billed separately, per character.
What is not covered?
This is the Fabric route only: one still image plus your audio. Sume's Avatar 1.0 video is billed by video second at separate rates, compared in a sibling post. I did not test output quality at either resolution, and the price page does not say whether 720p changes render time, so measure that on your own clip.
Sources
Related posts
More in Pricing
- fal's pricing page vs what Sume bills: Kling v3, H3 Max, Nano Banana
fal lists Kling v3 Pro at $0.14 a second, H3 Max at $0.05, Nano Banana 2 at $0.08. Sume bills list x 1.25; its Kling card splits audio on and off.
- Finishing costs: captions and render as a share of a clip
Captions ($0.20) plus a one-minute render ($0.10) add $0.30 to every finished clip. That is 77% of a Grok clip's bill and 9% of a Seedance 2.5 clip's.
- FLUX.2 pro edit takes 9 references, 9MP total: price effect
fal says FLUX.2 pro edit accepts up to 9 reference images, 9MP of input in total, and bills input megapixels too. A worked cost range and a Sume check.
- FLUX 3 Image cost per megapixel: why 2K is the cheapest tier
From BFL's list prices, 2K works out near $0.025 per megapixel against $0.048 at 1K and $0.038 at 4K. A short script for pricing a batch before you commit.
Written by Sume