Gemini Omni Flash 1.1 clip cost matrix: 3 to 10 seconds, 360p to 4K
A lookup table for Gemini Omni Flash 1.1: list cost per clip for 3, 5, 8 and 10 seconds at 360p, 720p, 1080p and 4K, with Sume's list x 1.25 beside it.

At fal's list prices, a Gemini Omni Flash 1.1 clip costs $0.09 for 3 seconds at 360p up to $3.00 for 10 seconds at 4K. On Sume, which bills provider list times 1.25 and accepts 3 to 10 seconds, the same range reserves $0.1125 to $3.75. The table below is every duration and resolution in one place, so you can price a shot before submitting it.
List rates are from fal's Omni Flash 1.1 page, read 2026-10-01: $0.03, $0.10, $0.15 and $0.30 per second at 360p, 720p, 1080p and 4K. The 1.25 multiplier, range and resolutions are from the Sume docs.
What does each clip cost on Sume?
Every figure is rate times seconds times 1.25. It is arithmetic from list prices, not a quote; the live rate sits in pricing_skus.
| Duration | 360p | 720p | 1080p | 4K |
|---|---|---|---|---|
| 3 s | $0.1125 | $0.375 | $0.5625 | $1.125 |
| 5 s | $0.1875 | $0.625 | $0.9375 | $1.875 |
| 8 s | $0.30 | $1.00 | $1.50 | $3.00 |
| 10 s | $0.375 | $1.25 | $1.875 | $3.75 |
How do you use the matrix?
Treat 360p as the price of asking whether a shot works. A 5-second 360p test is $0.1875, so five attempts cost less than one 5-second 1080p final. Resolution multiplies cost more than duration does at the top end: a 4K clip costs ten times the 360p clip of the same length. Duration is linear, so cutting a 10-second plan to 8 seconds saves a fifth.
If you need a shot longer than 10 seconds, this model cannot make it in one call; Sume's docs list wan-3.0 and seedance-2.5 up to 30 seconds.
What about audio and inputs?
Sume's docs say Omni Flash 1.1 produces native synced audio, accepts image and video input_references but not audio, and exposes a video edit mode through the Video Router video_url field. fal's per-second prices on the page I read do not separate an audio-off price, so the matrix has no audio column. If you send a source video for an edit, check the catalog for how that request is priced before relying on this table, because I did not verify it.
Limits
Google's own per-second figure is about $0.10 at 720p, derived from its token price, and Google's page gives no 360p, 1080p or 4K conversion. fal's list is a third party's, and Sume's price follows its provider list. Check usage.cost on the first job of any batch.
Sources
Related posts
More in Pricing
- GPT Image 2.5 edit chains: four high passes cost one max image
At 1024x1024, four high-quality GPT Image 2.5 passes add up to the output price of one max image. What that means for a one-change-per-pass edit chain on Sume.
- grok-imagine-image-2.0 price: $0.04 to $0.08 per image, $0.01 input
xAI lists grok-imagine-image-2.0 from $0.04 (1K, low) to $0.08 (2K, medium) per output image, plus $0.01 per input image on edits. Table inside.
- How many 5-second AI video clips does $100 buy?
A $100 wallet buys 1,600 five-second Grok Imagine clips, 160 Wan 3.0 clips at 720p or 142 Kling 3 clips. Computed from the Sume video catalog, 2026-10-01.
- How much money can Sume hold in flight per plan?
Accepted job capacity is 6 on Free up to 120 on Scale. At $2.50 per 10-second Wan 1080p job, a full Scale queue holds $300. Computed from the docs.
Written by Sume